B1DC5 Fault Code Fix
It was the same message every time the vehicle was started: “EV mode temporarily unavailable.”
Mr B had been seeing it over several journeys, and the symptoms were consistent. The petrol engine ran from start-up on every journey. Electric driving wasn’t available. Switching to EV mode wasn’t possible. Fuel was being used regardless of how far he was going.
On a vehicle designed to offer electric driving, that was a significant loss.
That was what Mr B was experiencing with his 2020 Range Rover Evoque PHEV. EV mode had stopped working and he wasn’t sure why.
He contacted Shires Garage in Langport to have the fault investigated. We got the vehicle booked in quickly.

The fault prevented the Range Rover Evoque PHEV from operating in EV mode, forcing the petrol engine to remain running
There are several possible causes behind a Range Rover EV mode fault, and pinpointing the right one requires thorough testing. If your Range Rover PHEV won’t switch to EV mode, get in touch with Shires Garage in Langport and our technicians will help identify what’s going on.
Reviewing the Symptoms: Our First Look at the Range Rover EV Mode Fault
Mr B’s Range Rover Evoque PHEV was with us at Shires Garage, Langport, and our technicians started by speaking with him to understand how the fault had been presenting. EV mode was not available at any point, the petrol engine engaged at start-up and ran throughout every journey, and the dashboard display showed the “EV mode temporarily unavailable” message consistently.
Once the symptoms had been confirmed, our technicians connected dealer-level diagnostic equipment and completed a full system scan. The result was one stored fault code:
- B1DC5 High-voltage Coolant Heater #1, no operation.

The initial diagnostic scan identified B1DC5-93, indicating no operation from the high-voltage coolant heater
Our technicians reviewed the serial data as part of the same assessment, checking the operating status of the vehicle’s systems in the context of the stored fault code.
The fault code drew attention to the high-voltage coolant heater, but at this point it hadn’t been confirmed whether the heater unit had failed, whether a wiring or connection fault was the cause, or whether the problem was elsewhere in the circuit. Thorough PHEV hybrid system diagnostics were needed to establish the root cause.
Tracing the Root Cause Behind the B1DC5 Fault Code on the Range Rover Evoque PHEV
With a clear direction from the scan, our technicians began a thorough investigation of the fault. The correct B1DC5 fault code fix depended on confirming the root cause first, and that meant working through each possible cause systematically.
Step 1: Consulting manufacturer technical information
The B1DC5 fault code was researched through the manufacturer’s technical information service, looking specifically at how it applies to the Range Rover Evoque PHEV.
On a plug-in hybrid, the high-voltage coolant heater plays a central role in the thermal management system. It draws energy from the high-voltage battery to heat coolant, providing cabin heating without the petrol engine needing to run. If the heater fails, there is no way for the vehicle to heat the cabin using electricity alone. The system may then force the petrol engine to run for cabin heat, making EV mode unavailable.
Recognising this connection was important because it explains how a heater fault can prevent the vehicle from operating in electric mode. It also narrowed the investigation to the high-voltage coolant heater and the circuit that supports it.
Step 2: Checking for technical service bulletins
Our technicians reviewed the manufacturer’s database for any technical service bulletins or known issues associated with the B1DC5 fault code on this model.
The manufacturer’s records highlighted known cases of high-voltage coolant heater failure on the Evoque PHEV. While this was not a substitute for hands-on testing, it provided useful background and confirmed the investigation was on the right track.
Step 3: Visual inspection and electrical checks
Our technicians visually inspected the high-voltage coolant heater and the components surrounding it for signs of damage, corrosion, or disturbance. The wiring and connectors in the heater circuit were checked electrically at the same time.
- No external issues were identified. The wiring and connectors were undamaged, with no evidence of contamination.
Step 4: Active testing of the high-voltage coolant heater
Our technicians carried out active testing with dealer-level diagnostic equipment, activating the high-voltage coolant heater directly to monitor its response.
This step was completed by HV-trained technicians using insulated tooling and dedicated safety equipment, as it involves work within the vehicle’s high-voltage electrical system.
- No response was detected when the heater was activated. The unit was confirmed as having failed.

Manufacturer diagnostic testing confirmed a fault with the high-voltage coolant heater and directed replacement of the unit
Step 5: Circuit verification and wiring checks
To make sure the fault was within the heater unit and not present elsewhere in the circuit, circuit verification and wiring checks were carried out between the control module and the high-voltage coolant heater.
- All checks on the circuit came back within expected parameters, confirming the wiring and connections were not at fault.
The conclusion
Each stage of testing reinforced the same finding. The high-voltage coolant heater was non-responsive during active testing, and our technicians confirmed it as the root cause. This is a failure that has been seen on the Evoque PHEV before, and the testing confirmed Mr B’s vehicle had been affected. With the heater no longer functioning, the vehicle had no means of heating the cabin electrically. The system ran the petrol engine for heat instead, keeping it running continuously and preventing EV operation. That is what was behind the Range Rover EV mode fault Mr B had been dealing with.
The next step was clear: the high-voltage coolant heater needed to be replaced to complete the B1DC5 fault code fix.
Fitting a Replacement High-Voltage Coolant Heater
Our technicians called Mr B to walk him through the findings once testing was complete. We explained the root cause, confirmed that wiring and connection faults had been eliminated through testing, and set out why replacing the high-voltage coolant heater was the necessary repair. Mr B gave the go-ahead, and the repair began.
High-voltage safety procedures
- The vehicle’s high-voltage system was isolated and made safe as a first step, following manufacturer procedures throughout. An HV-trained technician carried out the full repair with insulated tooling and dedicated safety equipment.
Component replacement
- The failed heater was disconnected from the high-voltage system before being removed from the coolant circuit.
- The new unit was installed and all electrical connections, mounting points, and seals were thoroughly checked to confirm correct installation.
- The coolant circuit was refilled and the system tested to verify it was operating correctly.

The failed high-voltage coolant heater removed from the Range Rover Evoque PHEV before the replacement unit was fitted
Post-repair verification
- Stored fault codes were cleared from the control module.
- Post-repair checks using dealer-level diagnostic software confirmed the new heater was operating correctly.
- Our technicians ran the vehicle and monitored it to make sure EV mode had returned and the petrol engine was no longer running continuously.
- A complete scan of all vehicle systems confirmed no fault codes had returned.
How the B1DC5 Fault Code Fix Restored Mr B’s Electric Driving
After the repair was finished, Mr B’s Range Rover Evoque PHEV left Shires Garage with EV mode back in operation. The petrol engine was no longer running when it shouldn’t have been, the “EV mode temporarily unavailable” message had gone from the dashboard, and the vehicle was working as a plug-in hybrid should.
It was a result Mr B was happy with. The fault had been thoroughly investigated from start to finish, the root cause was accurately identified as a failed high-voltage coolant heater, and the repair was completed in one visit. Mr B was kept in the picture at every stage, with clear and honest communication giving him confidence in the work.
Shires Garage provided Mr B with a shorter turnaround than a main dealer, a competitive repair cost, and the reassurance that the work was completed by HV-trained technicians with the specialist equipment and safety procedures that hybrid vehicle work demands.
Range Rover EV Mode Fault? Get It Assessed at Shires Garage
When EV mode is no longer available on a plug-in hybrid, it changes the way you use the vehicle. Running costs rise, electric range is gone, and the vehicle stops performing the way it was built to. A professional hybrid car EV repair can restore the way it should work.
If your Range Rover PHEV is stuck running on petrol, or EV mode has stopped working, having the system thoroughly assessed is the right move. At Shires Garage in Langport, our technicians have the knowledge and experience to carry out a Range Rover EV repair with the thoroughness and precision it calls for. We’ll investigate the fault, let you know what we find, and give you an honest recommendation before any work begins.
Call Shires Garage on 01458 250570 to talk through the issue or book your vehicle in. We look forward to hearing from you.
Why Choose Shires Garage?
- HV-Trained Technicians: Our team includes technicians trained to work safely on high-voltage systems, with the insulated tooling and safety equipment that hybrid and electric vehicle work demands. Not every garage can offer this.
- Evidence-Led Diagnosis: Every repair is built on a structured technical evaluation that identifies the root cause before any parts are changed.
- Honest Communication: We tell you what we find and let you decide how to proceed.
- Dealer-Level Equipment: We use manufacturer diagnostic software and dealer-level equipment for thorough technical evaluations.
- Courtesy Car: A free courtesy car is available to keep you mobile while your vehicle is with us.
- Guaranteed: Our 12-month parts and labour guarantee covers every repair.
Shires Garage is rated {{average-rating}} stars on Google by {{review-count}} drivers. Take a look at what they say.